Glossary · Diamond Proportions

Depth Percentage

depth ÷ diameter × 100 · ideal 59–62.5% for round brilliants

Depth percentage is the ratio of a diamond's total depth to its width — a key driver of both optical performance and face-up size per carat weight. Too deep: weight is hidden below the girdle and the diamond looks small. Too shallow: light leaks out the bottom. The GIA Excellent cut range targets the optimal middle ground.

How Depth Percentage is Calculated

For a round brilliant: Depth % = Total depth (mm) ÷ Average diameter (mm) × 100. The total depth is measured from the table (flat top) to the culet (bottom point). Average diameter is the mean of the minimum and maximum diameters (round diamonds are not perfectly circular — they vary by 0.01–0.05 mm).

Example: a 1.00 ct round with measurements 6.40–6.43 × 3.97 mm has an average diameter of 6.415 mm and a depth of 3.97 mm. Depth % = 3.97 ÷ 6.415 × 100 = 61.9% — within the GIA Excellent range. All measurements are listed on the GIA grading report. Verify at GIA Report Check.

For fancy shapes (oval, cushion, princess, etc.), depth % is calculated as: depth ÷ width × 100, where width is the shorter dimension. GIA does not issue cut grades for fancy shapes, so depth % is one of several parameters buyers evaluate manually. Community proportion guides for each shape are available at PriceScope's education section.

Depth and Face-Up Size

Carat weight is mass — heavier stones can be achieved by cutting deep (retaining more weight in the pavilion below the girdle) without increasing the face-up diameter proportionally. A 1.00 ct round with 65% depth appears smaller face-up than a 1.00 ct round with 61% depth, despite weighing the same. The deeper stone has more carat weight hidden below the table.

This is why depth percentage — alongside table % — is the key determinant of face-up size per carat. For buyers who want maximum apparent size: prioritise stones in the 59–62% depth range at GIA Excellent cut grade. Deeper stones within the GIA Excellent range still perform well but may appear slightly smaller. Outside the GIA Excellent range (below 58% or above 63%+), significant light performance compromises begin to appear. See our diamond size chart guide for the carat-to-mm relationship across shapes.

Round Brilliant Diamond Depth Percentage Guide

For a round brilliant diamond depth percentage, the ideal range is 59-62.5%. This range was established through extensive optical modelling by GIA and confirmed by observer studies. To calculate depth percentage of a diamond, divide the total depth measurement (in mm) by the average diameter (in mm) and multiply by 100. A good diamond depth balances face-up size with optical performance — stones at 59-60% depth appear slightly larger face-up, while stones at 62-62.5% may appear slightly smaller but still perform well optically. Understanding how to calculate depth percentage of a diamond empowers buyers to quickly filter listings: stones outside the 59-63% range are less likely to receive a GIA Excellent cut grade and should be evaluated carefully. Track current depth-optimised stone prices at Rapaport.

Frequently Asked Questions

What is diamond depth percentage?

The ratio of a diamond's total depth (table to culet) to its average diameter, expressed as a percentage. Depth % = total depth ÷ average diameter × 100. For a round brilliant, the GIA ideal range is approximately 59–62.5%. Depth % is listed on every GIA grading report under the proportions section.

What depth percentage is ideal for a round brilliant?

GIA's Excellent cut grade range is approximately 58–62.5% depth for round brilliants. The community sweet spot is 59–62%. Below 58%, light leaks out the bottom (shallow cut, larger face-up but less brilliance). Above 63%, the diamond carries weight in the pavilion that adds carat weight without adding face-up size. For the full cut grade criteria, see GIA's cut grading page.

Does a higher depth percentage mean a bigger or smaller diamond?

Higher depth % generally means a smaller face-up diameter for the same carat weight — the weight is in the pavilion depth rather than spread across the table. A shallower stone (lower depth %) has a larger face-up diameter for its carat weight. Extreme shallowness reduces light return quality; the optimal range balances size and optical performance.

What is a good depth percentage for a round brilliant diamond?

A good diamond depth for a round brilliant falls in the 59-62% range, which is the community-preferred subset of GIA's broader Excellent range (approximately 58-62.5%). Stones at 59-60% depth tend to appear slightly larger face-up (more "spread"), while stones at 61-62% may have marginally better light return. The round brilliant diamond depth percentage sweet spot balances face-up size with optical performance. Depth outside 58-63% increasingly compromises either brilliance (too shallow) or face-up size (too deep). Always cross-reference depth percentage with the overall cut grade on the GIA grading report.

How does depth percentage affect the price of a diamond?

Directly — stones with better depth proportions (within the GIA Excellent cut range) command higher prices per carat because they perform optically better. Poorly-cut deep stones are sometimes sold at discounts that appear attractive on a price-per-carat basis but actually deliver less visual diamond per dollar. Always benchmark at CaratAtlas and compare GIA-certified Excellent-cut stones only.