Glossary · Clarity · Blemishes

Extra Facet

surface blemish · outside standard facet plan · symmetry impact · often minor · GIA-noted

An extra facet is a small polished surface added outside a diamond's standard facet arrangement — typically to remove a surface blemish without significant weight loss. GIA notes extra facets on grading reports as blemishes. They may reduce the symmetry grade but rarely affect clarity significantly, and many are invisible in normal viewing.

Why Extra Facets Are Added

Diamond cutting involves precision — but the rough diamond often has surface features that complicate the polishing process. A natural (a portion of unpolished rough surface left on the girdle), a small chip at the girdle edge, or a surface-reaching inclusion can create a problem: removing it by re-cutting a larger area of the stone would sacrifice significant carat weight. The alternative is to place a small additional facet directly at that location, creating a polished surface that either removes the blemish entirely or reduces it to an acceptable level.

The result is an extra facet — a practical, workmanlike decision by the cutter. It adds a polished surface to the stone's geometry that was not part of the original facet plan. For round brilliants, this disrupts the expected symmetry of the facet arrangement. For fancy shapes (which have more variable facet arrangements to begin with), extra facets are less disruptive to the overall geometry. GIA records extra facets in the blemish section of the grading report and plots them on the clarity diagram. Verify on any GIA certificate at GIA Report Check.

Extra Facets and Symmetry Grade

For round brilliant diamonds, GIA Excellent symmetry requires the facet arrangement to be regular and consistent. An extra facet — a polished surface not part of the standard 57-facet or 58-facet plan — is a symmetry deviation. Depending on its size and how prominently it disrupts the overall symmetry pattern, it may reduce the symmetry grade from Excellent to Very Good, or in significant cases, to Good.

The practical implication: buyers targeting "Triple Excellent" (Excellent cut + Excellent polish + Excellent symmetry) should check whether an extra facet is present on any stone they consider. The GIA report clearly states the symmetry grade, and the online Report Check shows all noted characteristics with locations. A stone with an extra facet on the pavilion near the girdle might still achieve Excellent symmetry if the facet is small and the deviation is within GIA's tolerance. A more prominent extra facet on a main crown facet would prevent Excellent symmetry. See our symmetry glossary for the full GIA symmetry grading framework.

Practical Buying Evaluation

When an extra facet appears on a GIA report, the evaluation process is straightforward:

1. Locate it. The GIA clarity plot shows the position of the extra facet with a specific symbol (a short line or small outlined shape). Is it on the crown (visible face-up), the pavilion (visible from below and at angles), or the girdle (least visible from standard viewing positions)?

2. Check the symmetry grade. If the stone is GIA Very Good or Excellent symmetry despite the extra facet, it is small enough to be within tolerance. GIA Good symmetry warrants more consideration.

3. Inspect 360° video. At James Allen, rotate the stone and look for any visible distortion at the location of the extra facet. A small pavillion extra facet is typically undetectable in normal video viewing.

4. Consider price. Stones with extra facets may trade at a small discount to otherwise equivalent stones. Benchmark at CaratAtlas (CC BY 4.0). If the extra facet is invisible in video and the symmetry grade is Very Good or Excellent, the discount represents pure value. Our clarity guide covers all blemish types in buying context.

Frequently Asked Questions

What is an extra facet on a diamond?

An extra facet is a small polished surface placed on a diamond outside the standard facet pattern for that cut. A round brilliant has a defined facet arrangement — any additional polished flat surface beyond this plan is an extra facet. Extra facets are intentional, deliberate additions made during the polishing process, typically to remove a surface-reaching inclusion, a chip, a natural (a portion of rough surface), or a minor surface blemish. By polishing a tiny additional facet at that location, the cutter removes the blemish without removing a larger amount of carat weight. GIA notes extra facets as blemishes on grading reports. See our blemish glossary for the full range of surface characteristics.

Do extra facets affect the clarity grade?

Extra facets are classified as blemishes (surface characteristics), not inclusions (internal characteristics). Their effect on clarity grade depends on their size and visibility: very small extra facets visible only under 10× magnification have minimal effect on clarity grade — they may appear on the clarity plot but not drive the grade. Larger extra facets visible to the naked eye would be graded as a more significant clarity characteristic. In practice, most extra facets encountered on GIA-certified VS2–SI1 diamonds are minor — they were placed to resolve a surface blemish and are themselves less visible than what they replaced. Verify on the GIA report at GIA Report Check.

Do extra facets affect the cut or symmetry grade?

Extra facets can affect the symmetry grade for round brilliants. A round brilliant's symmetry is assessed in part by the regularity of its facet arrangement — an extra facet disrupts the expected pattern and is therefore a symmetry deviation. Depending on its size and location, an extra facet may prevent a stone from achieving GIA Excellent symmetry, placing it at Very Good or lower. For fancy shapes (which do not receive a GIA cut grade), extra facets are noted as blemishes but do not affect a cut grade that doesn't exist. The symmetry impact is the most practical concern for buyers of round brilliants targeting GIA Excellent. See our symmetry glossary for how GIA grades symmetry.

Where are extra facets typically placed on a diamond?

Extra facets are most commonly placed on the girdle area or on the pavilion — locations where a surface blemish or small natural occurred during polishing. The girdle is the most common location because naturals (rough surface remnants) occur there most often. Pavilion extra facets are placed to address chips or nicks on the bottom surface. Crown extra facets are rarer but do occur. An extra facet on the pavilion near the culet is the least visible location from above; an extra facet on a main crown facet near the table is the most visible. The GIA clarity plot and GIA report online view show the location of noted extra facets. Browse high-quality 360° video inventory at James Allen to assess extra facet visibility in context.

Should I avoid diamonds with extra facets?

Not necessarily. An extra facet is a workmanlike solution to a practical cutting problem — the cutter chose to preserve carat weight by adding a small polished surface rather than re-cutting a larger area. In many cases, the diamond with an extra facet is better than it would have been had the cutter tried to remove more material. The practical evaluation: check the GIA report to locate the extra facet; check 360° video to see if it is visible face-up or from the side; confirm the symmetry grade is acceptable (Very Good or Excellent for rounds). If an extra facet is on the pavilion near the girdle and is invisible in video, it has no practical impact on the buying decision. Compare pricing for stones with minor extra facets against clean equivalents at CaratAtlas (CC BY 4.0).