Glossary · Clarity · Inclusions
Feather
inclusion type · fracture · cleavage crack · GIA clarity characteristic
A feather is a fracture or cleavage plane within a diamond that creates a white, reflective appearance at certain angles — resembling a feather under magnification. It is one of the most common inclusion types noted on GIA reports. Small internal feathers are harmless; large feathers breaking the surface require careful evaluation for durability and clarity impact.
How Feathers Form
Diamond crystals have natural cleavage planes — directions along the crystal lattice where the atomic bonds are weaker. These correspond to the octahedral planes of the diamond cubic structure. When stress occurs during growth in the mantle, during volcanic transport to the surface, or during the cutting and polishing process, the crystal can crack along these planes, producing a feather.
Feathers are distinguished from other fractures by their flat, planar nature. Because they are essentially a separation of the crystal lattice along a crystallographic plane, they reflect light very efficiently from one direction (appearing white and cloud-like) and become nearly transparent from perpendicular angles. This is the diagnostic sign used by GIA graders to identify feathers versus other inclusion types. The GIA report plot (clarity diagram) marks feathers with a specific symbol — a red zigzag line for internal feathers, with an open circle if the feather breaks the surface. Verify any feather's location on the report at GIA Report Check.
When Feathers Matter — and When They Don't
Insignificant feathers — small, internal, not reaching the surface, located in a structurally stable area (e.g. near the girdle mid-section or in the pavilion) — are present in the majority of VS2 and many SI1 diamonds and present no practical concern in normal wear. These feathers are stable and are not propagating cracks; they simply mark where the crystal experienced stress during its formation. A VS2 diamond with a small feather in the pavilion and no other characteristics is typically eye-clean and completely safe for lifetime wear.
Significant feathers require more care. A feather that breaks the surface — particularly at the girdle, table, or near a corner of a princess cut or pear — creates a point of structural vulnerability. Ultrasonic cleaners vibrate at frequencies that can propagate open surface fractures. Impact at the right angle can cause an open feather to extend. GIA notes open (surface-reaching) feathers explicitly on the grading report. If a stone has a surface-reaching feather at a vulnerable point, consider: (1) whether prong placement can cover it; (2) whether a bezel setting provides better protection; (3) whether a different stone would eliminate the risk entirely. Browse clarity-graded diamonds with detailed plots at James Allen.
Reading Feathers on the GIA Report
GIA's grading report includes a clarity plot — a diagram of the stone showing the location, type, and approximate size of every clarity characteristic. Feathers are marked in red (internal) or green (external surface-reaching) using a specific symbol. Key things to note:
Size: GIA's plot symbols are not drawn to exact scale — a large symbol does not always indicate a visually prominent feather. Read the symbol as a location indicator, not a size indicator. Assess actual visibility via 360° video.
Location: A feather under the table (centre of the stone face-up) is more likely to be visible than one near the girdle or in the pavilion. A feather at a corner of a fancy shape is more of a durability concern than one in the body of the stone.
Surface-reaching: The GIA report will note "Feather, breaks surface" if the fracture has an opening on the exterior. This is the key durability flag. Our GIA report reading guide explains the full clarity plot in detail.
A diamond feather inclusion is one of the most commonly encountered clarity characteristics across all grades. Verify feather location and severity via the grading report at GIA Report Check or IGI report lookup. Wholesale pricing from Rapaport does not differentiate feather-dominant from crystal-dominant stones at the same clarity grade, so individual stone inspection is essential. The Natural Diamonds Council provides educational content on how feathers form during natural diamond crystallisation deep in the Earth's mantle.
Frequently Asked Questions
What is a feather inclusion in a diamond?
A feather is a fracture or cleavage plane inside (or partially inside) a diamond. Under magnification, it appears as a white or reflective flat surface — resembling a feather at certain angles, transparent at others. Feathers form during the diamond's growth in the mantle or during cutting when stress causes the crystal to cleave slightly. Small feathers within the body of the diamond and not near the surface are common in VS1–SI1 diamonds and are generally not a concern. See our inclusion glossary for the full range of clarity characteristics.
Does a feather affect a diamond's durability?
It depends on the feather's size, depth, and location. A small internal feather that does not reach the surface and does not fall in a vulnerable structural position (e.g. near the girdle or under a prong) poses no durability risk in normal wear. A large feather — particularly one that breaks the surface at the girdle, table, or near a corner of a fancy shape — is an open fracture that could propagate under impact or ultrasonic cleaning. GIA notes whether a feather "breaks the surface" on the grading report plot. If buying a stone with a significant feather, avoid aggressive ultrasonic cleaning and have it professionally evaluated. Verify feather location via GIA Report Check.
How does a feather look different from a crystal inclusion?
A feather changes appearance dramatically depending on the viewing angle — it appears white and reflective from one direction, then nearly invisible when viewed from a perpendicular angle. A crystal inclusion (a trapped mineral) looks the same from all angles — it may appear as a white dot, dark crystal, or coloured point. This angle-dependent visibility is the diagnostic signature of a feather. In 360° video at James Allen, you can sometimes see a feather disappear and reappear as the stone rotates. A crystal, by contrast, will remain visible throughout the rotation.
What clarity grades commonly have feathers?
Feathers appear across the clarity scale but become more common and significant from VS2 downward. VVS diamonds may contain minute feathers visible only under high magnification. VS1 and VS2 stones often have small feathers that are not visible to the naked eye. SI1 diamonds frequently contain feathers as their primary clarity characteristic — the question is location and eye-visibility. SI2 stones may have feathers visible face-up. I1 and below may have feathers affecting both transparency and durability. For step cuts (emerald cut, Asscher cut), feathers are more visible due to the open facet architecture — VS2 is the recommended minimum. See our eye-clean glossary entry.
Is a feather the same as a chip?
No — a feather is an internal fracture within the diamond body. A chip is an external concave break on the surface — typically at the girdle, facet edges, or culet — resulting from impact. Chips are noted separately on the GIA report as a blemish category. A chip is structurally different from a feather: it has already broken through the surface, whereas a feather is an internal fracture that may or may not reach the surface. Both affect clarity grade, but chips are generally more visible and more of a durability concern than small internal feathers.