CUT PARAMETER LOWER HALF OF DIAMOND CONTROLS LIGHT RETURN

Pavilion

The lower half of a diamond — everything below the girdle down to the culet. Pavilion depth and angle are the most critical proportions in a round brilliant: they determine whether light bounces back through the table or leaks out the bottom.

A round brilliant's pavilion contains 25 facets: 8 large pavilion mains, 16 lower girdle facets, and the culet at the bottom. The pavilion mains act as the primary mirrors of the stone — light entering through the table strikes them first on the way down and they reflect it back up toward the crown.

Pavilion depth is expressed as a percentage of the average girdle diameter. The GIA Excellent range for round brilliants targets 42.8–43.2%, with the pavilion angle between 40.6° and 41.0°. Deviations in either direction reduce optical performance: too shallow causes light to exit through the bottom (the "fisheye" effect), too deep traps light on the opposite side (the "nail head" effect).

The pavilion angle works in concert with the crown angle. When these two angles combine optimally, they maximise both brightness (internal reflection) and fire (chromatic dispersion). This coupling is why minor deviations in pavilion angle can be compensated by a matching adjustment in crown angle — and why GIA evaluates the full set of proportions together rather than any single parameter in isolation. Learn more in our 4Cs priority guide.

The ideal pavilion depth for a round brilliant is 42.8–43.2% of average girdle diameter. This figure is always listed on a GIA grading report under the proportion measurements. When comparing stones, checking pavilion depth alongside the overall cut grade is the fastest route to filtering for well-cut rounds. For fancy shapes — oval, cushion, pear — GIA does not issue cut grades, so pavilion depth must be assessed manually using community-established benchmarks (see PriceScope for shape-specific guidelines).

IDEAL DEPTH
42.8–43.2%
IDEAL ANGLE
40.6–41.0°
FACET COUNT
25 (main + lower)

PAVILION DEPTH RANGES — ROUND BRILLIANT

DEPTH % LABEL VISUAL EFFECT
< 42.5% Too shallow Fisheye — white circle in table
42.5–42.8% Shallow Slightly reduced light return
42.8–43.2% Ideal Maximum light return
43.2–44.0% Slightly deep Minor leakage at sides
> 44.0% Too deep Nail-head effect — dark centre
CROSS-SECTION SIDE VIEW GIRDLE CROWN PAVILION DEPTH CULET ~40.8°

Pavilion of a diamond: depth and angle guide

The pavilion of a diamond is the lower half of the stone below the girdle, and it serves as the primary light-return mechanism. Pavilion depth diamond measurements — expressed as a percentage of the average girdle diameter — directly determine whether a round brilliant achieves GIA Excellent cut grade. The ideal pavilion depth of 42.8-43.2% creates the correct angle for total internal reflection, ensuring light enters through the table and bounces back to the observer's eye. Understanding pavilion proportions is critical because even small deviations from the ideal range produce visible optical defects: a shallow pavilion causes a "fisheye" effect (a white ring visible through the table), while a deep pavilion creates a "nail head" (a dark centre). These effects are well-documented in GIA's Gems and Gemology research. For buyers comparing stones online, checking pavilion depth on the GIA report alongside the overall cut grade is the fastest way to filter for well-cut rounds. Market pricing for pavilion-optimised stones is tracked by Rapaport.

Questions about the pavilion

What is the ideal pavilion depth for a round brilliant?

GIA's Excellent cut grade allows a pavilion depth of approximately 42.8–43.2% of average girdle diameter for a round brilliant, with most cutters targeting 43.0%. Too shallow (below ~42.5%) causes light to leak through the bottom — a "fisheye" effect visible as a white ring inside the table. Too deep (above ~44%) traps light on the opposite side of the stone, creating a dark centre called a "nail head." See our cut grade explainer for the full parameter table.

How does the pavilion angle affect sparkle?

The pavilion main facets act as mirrors. When their angle is optimal (~40.6–41.0° for round brilliants), they reflect light back up through the crown and out the table — maximising brightness and fire. Off-angle pavilions leak light through the bottom or sides, reducing return and contrast. The interaction between pavilion angle and crown angle is critical: a specific sum of the two determines the exit angle of refracted light, which drives fire. This coupling is why GIA evaluates crown and pavilion together.

Can I see pavilion quality in a grading report?

Yes. GIA grading reports list pavilion depth (as % of average girdle diameter) and pavilion angle (in degrees) for round brilliants. These numbers let you calculate how far a stone falls within the Excellent bracket without seeing it. A GIA report showing pavilion depth 43.0% and pavilion angle 40.8° is a strong start — but the full cut grade integrates 8 parameters, so look at the overall cut grade plus the proportion diagram.

Do fancy shapes have pavilion specifications?

Fancy shapes (oval, cushion, pear, emerald, princess) do not have GIA cut grades equivalent to round brilliants. Pavilion parameters are still present but evaluated differently. Shape price discounts exist partly because fancy shapes have less standardised cut quality evaluation, making comparison harder. For oval and pear shapes, pavilion depth interacts with the bow-tie effect — shallow pavilions typically produce more pronounced bow ties.

What is a pavilion facet vs a pavilion main?

The pavilion consists of several facet types: pavilion mains (the 8 large kite-shaped facets that run from girdle to culet), lower girdle facets (16 smaller triangular facets near the girdle), and the culet. The pavilion mains dominate light performance because their angle and size control the primary reflection path. Lower girdle facets affect contrast and scintillation. The ratio of lower girdle facet length to the total pavilion height is called the lower-girdle ratio and is reported on GIA's in-depth diamond dossiers.