Glossary · Settings

Pavé Setting

Also: micropavé, French pavé, bead setting, shared-prong pavé

Pavé (French: "paved") is a setting style where small diamonds are placed closely together across a surface, held by tiny prongs, beads, or shared metal walls. The result is a continuous, encrusted sparkle covering the ring surface with minimal visible metal. Pavé is used for engagement ring halos, ring shanks, wedding bands, and any surface where brilliant coverage is the goal. The diamonds in pavé settings are small — typically 1.0–2.5mm — and contribute primarily to the overall sparkle of the piece rather than as individual stones.

Pavé types

TypeStone sizeProng styleCharacter
Standard pavé1.5–2.5mmIndividual round beadsClassic, robust
Micropavé0.8–1.5mmMinute individual prongsDelicate, refined, higher labour cost
Shared-prong1.5–2.5mmOne prong per two stonesMost continuous sparkle, standard commercial
French pavé1.5–2.0mmV-shaped cutouts between stonesMaximum side light, most open

Where pavé is used

The three most common pavé applications in engagement rings: (1) Halo — a ring of pavé-set small diamonds surrounding the centre stone, visually increasing the apparent size of the centre diamond. See our halo ring guide. (2) Pavé shank — the ring band set with pavé diamonds down the sides or all the way around. Adds sparkle on the finger but increases maintenance requirements. (3) Pavé wedding band — a band set fully with pavé diamonds. Our pavé ring guide covers all three applications.

Stone loss risk and maintenance

Stone loss is the primary maintenance concern for pavé settings. The small prongs holding individual stones can wear down from daily contact, snag on fabric or hair, or be damaged by impacts. Very fine micropavé is particularly vulnerable. If a single stone falls out, the adjacent stones become less secure — repair should be prompt. Annual professional inspection is essential for pavé-set rings worn daily.

For full pavé eternity bands (pavé all the way around the ring), there is no metal-free zone on the underside for resizing — this limits resize options and increases stone loss risk under the finger. See our eternity ring guide for the full maintenance and sizing discussion. Also see our ring care guide.

Frequently Asked Questions

What is a pavé setting?

Pavé (French for "paved") is a setting style where small diamonds are set closely together across a surface, held by tiny prongs or beads, creating an encrusted, sparkling surface. Pavé is used for engagement ring halos, ring shanks, wedding bands, and accent surfaces where covering an area with diamond brilliance is the goal. The diamonds are small — typically 1.0–2.5mm — and the metal between them is minimal, producing a "paved" appearance with little visible metal.

What is the difference between pavé and micropavé?

Micropavé uses smaller diamonds (typically 0.8–1.5mm) set with more precision and finer metalwork than standard pavé. The prongs are smaller, the metal between stones is thinner, and the overall effect is more delicate and refined. Standard pavé uses slightly larger stones with slightly larger prongs — it is more robust but less fine. Micropavé is more expensive per unit of area because of the labour intensity. For daily-wear rings, standard pavé with adequate prong security is generally recommended over very fine micropavé.

Do pavé diamonds fall out?

Pavé diamond loss is a known risk, particularly with very fine micropavé settings. The small prongs holding individual stones can wear down, snag on fabric, or be damaged by knocks. For engagement rings worn daily, pavé-set accent stones can loosen and fall out over years of wear. Annual professional inspection and immediate attention to any loose stone are essential. Full pavé eternity bands have the highest risk — the setting wraps all the way around with no safe zone on the underside of the ring. See our eternity ring guide for pavé durability considerations.

What is shared-prong pavé?

Shared-prong pavé (also called bead-set pavé or U-cut pavé) uses a single prong shared between two adjacent diamonds rather than individual prongs per stone. This allows stones to be placed closer together for a more continuous sparkle effect, with less metal visible between stones. It is slightly less secure than individual-prong pavé because each prong serves two stones, but it is the most common commercial pavé configuration. Compare with French pavé, which uses V-shaped cutouts in the metal between stones for maximum light entry from the sides.