Polish
A measure of how smooth a diamond's facet surfaces are after cutting. One of three cut sub-grades on a GIA report (alongside symmetry and overall cut). Excellent or Very Good polish is recommended for any quality purchase.
Polish is evaluated by a GIA grader using 10× magnification. The grader inspects each facet surface for defects introduced during the cutting and polishing process. Polish defects are surface features — they are distinct from clarity characteristics, which are internal or external structural features affecting the diamond's body rather than its surface finish.
In practice, the difference between Excellent and Very Good polish is invisible to the naked eye and irrelevant to most buyers. The meaningful thresholds are between Good and Fair (where defects may become visible) and between Fair and Poor (where they are unambiguously visible and affect brilliance). The 3EX (Triple Excellent) designation requires Excellent in cut, polish, and symmetry — and commands a premium particularly in Asian markets.
Diamond polish interacts directly with brilliance and brightness. Poor surface finish scatters light at the facet surface before it even enters the stone, reducing the clean white light return that characterises a well-cut diamond. For buyers specifically seeking a Hearts & Arrows stone — which requires a Triple Excellent (3EX) certificate — Excellent polish is mandatory. For all other buyers, Very Good is the practical floor.
When evaluating diamonds online, prioritise stones with at least Very Good polish. Many price comparison tools, including our own price explorer, include the full GIA report data — check the polish field before finalising any purchase. For the full cut quality picture, also read our guides on symmetry, table percentage, and diamond depth.
- MINIMUM RECOMMENDED
- Very Good (VG)
- 3EX REQUIRES
- Excellent (EX)
POLISH GRADES — GIA SCALE
Facet surfaces appear perfectly smooth under 10× magnification. No polish defects visible. Required for GIA Triple Excellent (3EX) designation.
Baseline; commands premium
Extremely minor polish defects visible only under 10× by a skilled grader. No visible effect on brilliance. Acceptable for most buyers.
Negligible discount vs EX
Minor polish features visible under 10×, possibly with difficulty to the naked eye. No perceptible impact on appearance for most observers.
Slight discount
Polish features more easily visible under magnification and possibly to the naked eye face-up. May slightly reduce brightness. Avoid for D–G colour stones.
Moderate discount (3–8%)
Visible defects face-up without magnification. Noticeable reduction in brilliance. Rare in commercial stones — avoid.
Significant discount
Questions about polish
Does polish grade matter when buying a diamond?
Yes, but only below Very Good. Diamonds graded Excellent or Very Good for polish are visually identical in normal viewing — the difference only shows under 10× magnification. Good polish is generally acceptable for budget-conscious buyers. Fair and Poor polish should be avoided, as surface defects can reduce brilliance and are visible to the naked eye. Most retailers selling certified GIA rounds target Excellent polish as part of a Triple Excellent package.
What polish defects does GIA look for?
GIA identifies specific polish features when grading: polish lines (faint parallel scratches from the polishing wheel), lizard skin (a slightly undulating surface from uneven polishing), burn marks (heat damage from polishing without enough lubrication), rough girdle (unpolished granular girdle surface), and abrasion (tiny nicks on facet edges). Polish lines are the most common and are a normal artefact of the manufacturing process at low severity.
What is GIA Triple Excellent (3EX)?
GIA Triple Excellent refers to a diamond graded Excellent for all three cut sub-grades: overall cut grade, polish, and symmetry. 3EX is a quality designation used by retailers — particularly Japanese retailers, where 3EX commands a significant premium. A 3EX stone is not necessarily better than a 2EX (e.g., Excellent cut + Excellent polish + Very Good symmetry), since Very Good symmetry is visually indistinguishable from Excellent for most buyers. The 3EX premium is partly market convention.
How does polish relate to the overall GIA cut grade?
Polish is one of five factors GIA uses to determine the overall cut grade for round brilliants: brightness, fire, scintillation, weight ratio, and durability — with polish and symmetry influencing brightness and scintillation. In practice, poor polish can cap the overall cut grade at Good even if proportions are excellent. Most stones sold with GIA Excellent cut grade also carry Excellent or Very Good polish. If you see a stone with an Excellent cut grade but Fair polish, the report deserves closer scrutiny.
Can polish be improved after purchase?
Yes. A skilled diamond cutter can re-polish a diamond to improve its polish grade. This involves a small weight loss (typically 0.5–2% of carat weight) as the surface is refined. Re-polishing is used commercially when a stone has been damaged, when a buyer requests it for a specific purpose, or occasionally on estate pieces. The cost is usually $50–200 per stone for a simple re-polish by a trade cutter. GIA recommends re-grading after re-polishing to update the report.