Emerald Cut vs Asscher Cut: How to Choose Between the Two Great Step Cuts

The emerald cut and the Asscher cut are both step cuts — but they create strikingly different visual effects and suit different buyers. Here is the full comparison: outline, face-up character, clarity requirements, price, and which shapes complement which settings.

What makes a step cut different

Both the emerald cut and the Asscher cut belong to the step cut family — a faceting architecture that uses long, parallel facets arranged in steps rather than the triangular kite-facet arrangement of a brilliant cut. Where a round brilliant has 57–58 facets arranged to maximise scintillation (rapid light flashing), a step cut typically has 58–74 facets arranged to create depth and reflective "planes" — the famous "hall of mirrors" effect.

Step cuts show less light return than brilliant cuts but create a more architectural, sophisticated look. They are also less forgiving of inclusions — the open facets act as windows into the stone, making internal characteristics more visible than they would be in a round brilliant. This is why clarity standards for step cuts must be higher: VS2 is the general minimum for eye-clean results, versus SI1 for rounds. See our eye-clean glossary entry for the full clarity-by-shape analysis.

Outline and proportions: the key visual difference

The most immediate visual difference between an emerald cut and an Asscher cut is the outline. An emerald cut is a rectangle with clipped corners — its typical length-to-width (L:W) ratio is 1.40–1.70, creating an elongated shape that visually lengthens the finger. An Asscher cut is nearly square (L:W 1.00–1.05) with more aggressively clipped corners, creating an octagonal outline that appears broader and more symmetrical on the hand.

The elongated emerald cut's face-up appearance emphasises the stone's length — the hall-of-mirrors effect runs along the long axis. The Asscher cut's square outline creates a concentric octagonal pattern — some describe it as looking into a deep well or a kaleidoscope from above. The concentric pattern is the Asscher's signature aesthetic. Compare side-by-side at James Allen (filter by shape) or in our diamond shapes guide.

Price comparison: emerald vs Asscher

In October 2026, emerald cuts trade at approximately 10–18% below equivalent round brilliants in the same colour and clarity. Asscher cuts trade at approximately 8–15% below equivalent rounds — slightly less of a discount than emerald cuts. Both step cuts benefit from the standard fancy shape discount relative to rounds.

The Asscher premium over emerald (for equivalent specifications) exists because the Asscher cut has higher material wastage during cutting — the more square outline requires more of the rough diamond octahedron to be sacrificed compared to the elongated emerald cut, which aligns better with common crystal shapes. At 1.00 ct G VS2, expect: round brilliant ~$5,380/ct, Asscher ~$4,750/ct, emerald cut ~$4,580/ct (October 2026 benchmarks). Compare current step-cut prices at CaratAtlas (CC BY 4.0) using the shape parameter.

Settings and stacking

Both emerald and Asscher cuts are best showcased in simple, minimal settings that do not compete with the stone's distinctive optical character. A four-prong solitaire with thin prongs at the four corners — or a bezel setting — works beautifully for both. Halos around step cuts can look busy; the clean geometry of the step cut and the sparkle of a halo are aesthetically mismatched for most buyers.

The elongated emerald cut benefits from east-west orientation settings — a growing trend — and pairs well with thin baguette-cut side stones or tapered baguette wedding bands. The Asscher's square outline sits particularly well in Art Deco-inspired settings, which echo the Asscher's 1920s heritage. For three-stone rings, our three-stone guide covers the Asscher and emerald as centre stones with appropriate side stone options. Browse step-cut settings at Brilliant Earth and Whiteflash.

Frequently asked questions

Which is more popular — emerald cut or Asscher cut?
Emerald cuts are significantly more popular than Asscher cuts in 2026. Emerald cuts account for approximately 5–8% of diamond engagement ring sales; Asscher cuts are approximately 1–2%. The emerald cut has benefitted from high-profile celebrity associations and the elongated shape's visual appeal for Instagram content. The Asscher is a niche choice with a dedicated following, particularly among buyers who prefer vintage, Art Deco aesthetics. Both are more common than they were five years ago as step cuts overall have gained market share.
Which step cut shows inclusions more — emerald or Asscher?
Both show inclusions more readily than brilliant cuts, and the difference between emerald and Asscher in terms of inclusion visibility is marginal. The key factor is the clarity of the specific stone and the location of the inclusions — a crystal at the table centre is visible in both; a pinpoint near the girdle is not. For both shapes, VS2 is the recommended minimum clarity for eye-clean results; VS1 provides additional peace of mind for step cut buyers. Verify eye-cleanliness via 360° video at James Allen for any SI1 or below step-cut stone.
Do emerald cuts and Asscher cuts look larger than rounds at the same carat weight?
Emerald cuts have excellent spread — their shallower depth means they often show a larger face-up area than a round brilliant of the same carat weight. A 1.00 ct emerald cut typically measures 7.0×5.2 mm face-up vs 6.5 mm diameter for a round — giving a larger apparent size. Asscher cuts, being more square and often slightly deeper, have less spread advantage. The elongated emerald cut's "finger-lengthening" illusion also adds perceived size. Our diamond size chart has face-up dimensions for all shapes.
What colour grade should I choose for a step cut?
Step cuts are more colour-transparent than brilliant cuts — their large, open facets allow body colour to show more clearly. For white metal settings, G or better is the standard recommendation for emerald and Asscher cuts (vs H for rounds). F or higher provides a clearly colourless face-up appearance. H colour in a step cut in a white gold or platinum setting may show a very faint yellow tint that is not present in a round brilliant of the same grade. In yellow gold, I–J are acceptable because the warm metal colour masks body colour. Benchmark colour grade pricing at CaratAtlas.
Is an Asscher cut the same as a square emerald cut?
Not exactly — while both are step cuts and both are roughly square, the Asscher cut is specifically designed with a higher crown, smaller table, and more aggressively clipped corners (creating the octagonal outline) compared to a square emerald cut. A true Royal Asscher has even more distinctive proportions, with a deep pavilion that creates the characteristic concentric-square optical pattern. A square emerald cut has more rectangular-style clipped corners and a slightly different facet arrangement. The Asscher name is a registered trademark of the Royal Asscher Diamond Company for its specific proportioned cut.

TERMS IN THIS NOTE

Emerald cutAsscher cutClarityCutSpread emerald vs asscher 2026