Diamond Blemishes

Abrasion

A series of fine scratches along a facet junction of a polished diamond, giving the edge a white, fuzzy, or frosted look under magnification. Abrasions are wear features — they accumulate over time from contact with other diamonds or very hard surfaces, and they are one of the most common blemish types in well-worn diamond jewellery.

Abrasion vs scratch: the difference

A scratch is a single linear mark across a facet surface — drawn by a harder material across the face of the polished plane. An abrasion is denser and located specifically at a facet junction: many tiny parallel or overlapping micro-scratches packed into the edge line, creating a frosted or cloudy appearance at the junction rather than a line across the facet surface. Under a loupe, a scratched facet shows a distinct line; an abraded junction shows a fuzzy, rough band along the edge.

Both are classified by GIA as blemishes and both affect the polish grade. Scratches are often caused by a single abrasive event; abrasions accumulate over time from repeated contact. For detailed surface feature definitions, see our blemish glossary.

Abrasion and the polish grade

GIA's polish grade assesses the overall quality of all facet surfaces. Abrasions — particularly at visible crown facet junctions — are one of the most common reasons a diamond falls below Excellent in polish. The polish grade scale:

For a new diamond in GIA Excellent cut, abrasions should be absent or negligible — the polishing process would address them. For estate or pre-owned diamonds, abrasion is one of the first things to check under magnification. See our polish guide and second-hand diamond guide for evaluation context.

Prevention and maintenance

Abrasions are prevented by keeping diamonds separated during storage — individual pouches or a compartmented jewellery box prevents diamond-on-diamond contact. Stacking rings (multiple rings worn on the same finger) significantly increases abrasion risk at the contact points. If you stack diamond rings, have them inspected annually and repolished if abrasion becomes apparent.

Annual professional cleaning and inspection by a jeweller is the best way to catch early-stage abrasion before it becomes severe. A jeweller can inspect under magnification and advise on whether repolishing would benefit the stone. See our ring care guide for a full maintenance schedule.

Frequently Asked Questions

What is an abrasion on a diamond?

An abrasion is a form of surface wear at a facet junction — the line where two polished facets meet. Rather than a single scratch, an abrasion is a collection of tiny, densely packed micro-scratches that give the normally crisp facet edge a white, cloudy, or frosted appearance under magnification. It is caused by contact between the diamond and other very hard materials — most commonly another diamond, but also certain hard countertops, tools, or machinery.

How does an abrasion form on such a hard material?

Diamond is the hardest material (10 on the Mohs scale), but it can scratch itself. Diamond-on-diamond contact — such as when two rings are stored together, or when a diamond ring is stacked against another diamond ring — creates micro-scratches at the most exposed points: the facet junctions. These junctions are the thin edges where two facet surfaces meet, and they are the most geometrically vulnerable lines on the stone. Abrasions are an accumulation of many such contacts over time.

Can abrasions be removed?

Yes — a lapidary can repolish the affected facets to remove abrasions, restoring crisp, clean facet junctions. This removes a tiny amount of material and may very slightly reduce carat weight. Repolishing is worthwhile for high-value stones with significant abrasion; for smaller or lower-value stones, the cost may exceed the benefit. For practical prevention, store diamonds individually (not touching each other) and avoid stacking diamond rings. See our ring care guide for storage best practice.

How do abrasions affect a diamond's clarity grade?

GIA classifies abrasions as blemishes. Minor abrasions may not affect the clarity grade significantly — they are assessed in combination with all other features. Moderate to severe abrasions at prominent facet junctions (especially on crown facets visible face-up) can lower the grade by affecting the stone's polish evaluation and overall surface quality. GIA's polish grade is specifically penalised by abrasions: heavy abrasion will lower the polish grade from Excellent or Very Good to Good or below. See our polish guide for how surface quality affects the polish grade.

Are abrasions common in everyday-worn diamond rings?

Yes — abrasions are among the most common blemishes in worn diamonds, particularly in rings that are stacked or worn alongside other diamond-set jewellery. The facet junctions on the crown — particularly the upper girdle facet junctions visible face-up — accumulate abrasion most readily. A diamond that has been worn for many years without professional cleaning and inspection may have noticeable abrasion under 10× magnification. In some cases, this is responsible for a "dulling" effect the wearer notices, as abraded facet junctions scatter rather than cleanly reflect light.