Diamond Polish Grade Guide 2026

Polish is one of three components in GIA's finish assessment (alongside symmetry and cut grade). It measures the quality of the facet surfaces — how smooth and regular the polished planes are. This guide explains the five-grade GIA polish scale, which grades matter for buying decisions, and how polish interacts with symmetry and cut.

The GIA polish scale

Grade Surface quality Buyer guidance
ExcellentSmooth, regular facets; no features visible at 10×Best — target for all budgets
Very GoodVery minor features visible only at 10×Excellent choice — no visible impact
GoodMinor features visible at 10×; not face-up visibleAcceptable; check if price saving justifies
FairNoticeable features at 10×; possible face-up dullingAvoid for quality purchases
PoorObvious features; affects light performanceAvoid

In practice, virtually all GIA Excellent cut round brilliants grade Excellent or Very Good in polish — the cut grade methodology penalises poor finish, so achieving Excellent cut requires meeting minimum polish standards. The polish grade becomes most relevant for Very Good cut stones and for fancy shapes, which do not receive a GIA cut grade.

What polish features look like under magnification

GIA identifies specific polish features that appear in the key to symbols section of the grading report:

Most of these features at the Excellent or Very Good level are visible only under 10× magnification and have no face-up impact. At Fair or Poor, the features are visible at 10× and may create a dulling or haziness perceptible face-up. See our polish glossary entry and blemish glossary for individual feature definitions.

Polish, symmetry, and the Triple Excellent standard

GIA's "Triple Excellent" (or 3EX) designation describes a round brilliant that achieves Excellent in all three finish components: cut grade, polish, and symmetry. Triple Excellent is the benchmark used by premium online retailers and is the standard marketed by sellers of hearts-and-arrows precision cuts. It ensures no single component of finish quality is compromised.

For fancy shapes (oval, cushion, emerald, princess, etc.), GIA does not assign a cut grade — so Triple Excellent is not applicable. For these shapes, the practical benchmark is Very Good or better in both polish and symmetry. See our symmetry glossary for how symmetry is assessed independently of polish, and our cut grade guide for the full proportions and finish quality framework. Current price data by spec at CaratAtlas (CC BY 4.0).

Frequently Asked Questions

What is the diamond polish grade?

The GIA polish grade is an assessment of the overall quality of the polished facet surfaces on a diamond. It evaluates smoothness, regularity, and freedom from surface features such as scratches, lizard-skin (polishing burn), abrasions, and small nicks at facet junctions. GIA assigns one of five grades: Excellent, Very Good, Good, Fair, or Poor.

Does polish grade affect a diamond's brilliance?

At the GIA Excellent and Very Good levels, the practical impact on brilliance is negligible — facet surfaces in these grades are smooth enough that they do not meaningfully scatter or impede light. The human eye cannot detect the difference between an Excellent and Very Good polish stone face-up under normal viewing conditions. Below Good polish, surface defects can cause a slight haziness or dulling of the light reflected from facet surfaces. For most buyers, targeting Excellent or Very Good polish is the right approach; avoiding Fair and Poor is the only firm rule. See our polish glossary entry for the full definition.

What causes poor polish on a diamond?

Poor polish results from problems during the polishing process. Common causes include: too much heat from the polishing wheel creating a burn ("lizard skin") — a cloudy surface texture visible under magnification; using a polishing direction that is too close to the diamond's "difficult" crystallographic directions, resulting in rough or torn facet surfaces; and mechanical wear of the polishing lap leaving micro-scratches. These issues are manufacturing defects, not inherent to the rough material.

Is Very Good polish acceptable in a diamond purchase?

Yes — Very Good polish is entirely acceptable for most buyers. The visual difference between Very Good and Excellent polish is not detectable with the naked eye in normal lighting conditions. Buying a Very Good polish stone instead of Excellent can sometimes yield a small price saving, though in practice the price difference between Excellent and Very Good polish is minimal for round brilliants (most highly cut rounds already achieve Excellent polish). Very Good polish is a more meaningful consideration for fancy shapes, where achieving Excellent polish is slightly harder and some premium stones may grade Very Good.

What is the relationship between polish and symmetry grades?

Polish and symmetry are separate GIA grades assessed independently. Polish evaluates the quality of individual facet surfaces. Symmetry evaluates the precision of the facet arrangement — alignment, angles, and shape regularity. A diamond can have Excellent polish but Very Good symmetry (clean surfaces, but slight alignment imprecision) or vice versa. For maximum light performance, aim for both Excellent (Triple Excellent with cut grade) or at minimum both Very Good. See our symmetry glossary and cut grade guide.