Symmetry is one of GIA's three finish grades and evaluates the precision of facet placement — how accurately the facets are arranged around the stone's central axis. This guide explains the five symmetry grades, what specific features drive grade penalties, and how symmetry interacts with cut and polish for round brilliants and fancy shapes.
| Grade | Facet precision | Buyer guidance |
|---|---|---|
| Excellent | Facets aligned with very high precision; no detectable deviations at 10× | Target for premium purchases; standard in Triple Excellent |
| Very Good | Very minor deviations detectable at 10×; no visual impact | Acceptable; no meaningful difference from Excellent face-up |
| Good | Minor deviations at 10×; possible slight directional light bias | Acceptable with care; inspect face-up appearance before buying |
| Fair | Noticeable deviations; may create visible asymmetry in light pattern | Avoid for quality purchases |
| Poor | Obvious deviations affecting light performance | Avoid |
The hearts and arrows pattern is the hallmark of precision-cut round brilliants with near-perfect symmetry. When a round brilliant is cut to very tight angular tolerances (pavilion angle within ±0.2°, crown angle within ±0.5°, and all facets precisely aligned), the overlapping reflection pattern creates a pattern of eight hearts visible from below and eight arrows visible from above through a proprietary viewer.
Hearts and arrows stones represent the top tier of cut quality — beyond GIA Excellent/Triple Excellent, these are precision cuts that require additional manufacturing time and skill. They typically achieve Excellent symmetry on the GIA report but the hearts and arrows pattern itself is not assessed by GIA — it requires a specialised hearts and arrows viewer (HOF viewer, Ideal-Scope, or ASET scope) for evaluation. Vendors specialising in hearts and arrows cuts (Whiteflash A-CUT-ABOVE, Brian Gavin Signature, etc.) provide viewer images as standard. Benchmark prices at CaratAtlas (CC BY 4.0) — hearts and arrows stones typically command a modest premium over standard GIA Excellent.
Emerald cuts and Asscher cuts (step cuts) make symmetry far more visually apparent than brilliant cuts. In a brilliant-cut diamond, the facet arrangement creates dynamic scintillation that masks minor symmetry deviations — the eye is constantly moving between flashes. In a step cut, the eye tracks the parallel lines of the long rectangular facets in the crown and pavilion. A misaligned row of step facets creates a visible "lean" or irregularity in the geometric pattern.
For step cuts, the bar for symmetry is effectively higher than GIA's grading implies. A step cut with Very Good symmetry will look well-cut; one with Good symmetry may show slight irregularities that are apparent in the clean geometric face-up view. Ideally, require Excellent or Very Good symmetry for any step-cut stone. See our emerald cut glossary and Asscher cut glossary for shape-specific evaluation advice.
The GIA symmetry grade evaluates the precision of the diamond's facet arrangement — how accurately the facets are placed in relation to each other and to the stone's central axis. Key symmetry features assessed include: whether the table is centred over the culet, whether the culet is centred within the girdle, whether upper and lower half facets align through the girdle, whether facets are consistent in size and shape, and whether the girdle is uniform in thickness. A deviation in any of these creates an "off-centre" effect that can direct light asymmetrically.
At Excellent or Very Good symmetry, deviations are too small to affect the light pattern you see. At Good symmetry, slight misalignments may cause one sector of the diamond to appear darker than another when viewed face-up — a slight directional bias in light return. At Fair or Poor symmetry, this becomes noticeable: one side of the stone may consistently outperform the other, creating an uneven appearance. For round brilliants where the ideal is uniform, omnidirectional brilliance, symmetry below Good noticeably compromises the performance goal. See our symmetry glossary entry for definitions.
GIA evaluates a range of symmetry features and notes those present in the key to symbols section of the grading report: Off-centre table (table not centred over the stone), Off-centre culet (culet not under the table centre), Wavy girdle (girdle undulates instead of running true), Out-of-round (outline deviates from circular), Misaligned facets (upper and lower facets don't register across the girdle), Extra facets (may affect symmetry grade), Non-pointing facets (facets that don't meet precisely at junction points), and Tables and culets that are not parallel to each other.
Yes — Very Good symmetry is entirely acceptable. The visual difference between Excellent and Very Good symmetry in a round brilliant is not detectable by the naked eye under normal viewing conditions. Many premium stones grade Very Good in symmetry (due to minor features that don't visually impact performance) and Excellent in cut. The "Triple Excellent" standard (Excellent in cut, polish, and symmetry) is the benchmark for top-quality round brilliants, but Very Good in symmetry is not a meaningful compromise for most buyers. The firm threshold is: avoid Good or below. See our polish guide for the parallel assessment.
Yes — GIA assigns symmetry grades to all diamond shapes, not just round brilliants. For fancy shapes (oval, cushion, emerald, princess, pear, marquise), symmetry is more important relative to a round brilliant because GIA does not assign a cut grade to fancy shapes. The symmetry grade (along with polish) becomes the primary GIA quality indicator for the cutting precision. A fancy shape with Very Good symmetry confirms the cutter paid attention to alignment and regularity. For step cuts (emerald, Asscher) where the eye tracks the parallel lines of facets, symmetry is particularly visible — slightly misaligned steps are apparent. See our cut grade guide for how cut assessment differs by shape.