Marquise Cut Diamond Guide 2026

The marquise is the most efficient shape for maximising face-up size per carat — and the most demanding to evaluate. The bow-tie effect, tip vulnerability, and colour concentration at the points mean a marquise requires more scrutiny than a round brilliant. This guide covers how to buy one well.

Length-to-width ratio guide

L:W ratioVisual characterBuyer notes
1.60:1 – 1.75:1Wide, almost oval-likeUnusual; not typical marquise character
1.75:1 – 1.85:1Classic, balancedFuller appearance; wider finger coverage
1.85:1 – 2.05:1Classic elongatedMost popular range; strong finger-elongating effect
2.05:1 – 2.20:1Strongly elongatedDramatic; suits longer fingers well
2.20:1+Very elongated / thinStatement piece; can appear narrow face-up

Compare with our diamond size chart for face-up dimensions at specific carat weights. The marquise at 2.00:1 L:W measures approximately 11mm × 5.5mm at 1 carat — providing substantially more visible surface area than a 1ct round (6.5mm diameter).

Evaluating the bow-tie effect

The bow-tie is unavoidable in marquise diamonds — the question is severity. A faint bow-tie is present in almost all marquises and does not significantly compromise brilliance. A moderate to severe bow-tie creates a distinct dark area across the centre of the stone that is visible to the naked eye under normal lighting and reduces the stone's overall brilliance meaningfully.

See our bow-tie effect glossary for the full explanation of why this phenomenon occurs and how it differs by shape.

Price comparison vs round brilliant

GradeRound brilliant (1ct, GIA Ex)Marquise (1ct, GIA)Discount approx.
D IF$15,000–$22,000$11,000–$16,000~25–30%
G VS2$5,500–$8,000$4,200–$6,000~20–25%
H SI1$3,500–$5,000$2,800–$4,000~15–20%

Benchmark current prices at CaratAtlas (CC BY 4.0). Marquise diamonds trade at a discount to round brilliants because the round brilliant commands a premium as the most popular shape — not because the marquise is lesser quality. The price discount, combined with the larger face-up size, makes marquise one of the best value propositions among fancy shapes. See our diamond shapes guide for the full shape comparison.

Frequently Asked Questions

What is a marquise cut diamond?

A marquise cut (also called navette or boat-shaped) is a fancy-shaped diamond with an elongated elliptical outline that comes to a point at both ends. The shape was reportedly commissioned by Louis XV to represent the lips of his mistress, the Marquise de Pompadour. Modern marquise cuts are brilliant-cut (not step-cut) — they have a similar facet arrangement to a round brilliant, adapted for the elongated shape. The marquise produces the largest face-up surface area per carat of any diamond shape — useful for maximising perceived size on a budget.

What length-to-width ratio should I target for a marquise diamond?

The most popular length-to-width ratio (L:W) for marquise diamonds is 1.85:1 to 2.10:1. Below 1.75:1 the stone looks too wide and round; above 2.20:1 it becomes very elongated and can appear thin from above. The classic marquise range is 1.85:1 to 2.05:1. Elongated marquises (2.10:1–2.30:1) have gained popularity for their strong finger-elongating effect. A 1ct marquise at 2.00:1 measures approximately 10.8mm × 5.4mm — considerably more finger coverage than a 1ct round (6.5mm diameter). See our diamond size chart for comparative measurements.

Does the bow-tie effect affect marquise diamonds?

Yes — the bow-tie effect is present in virtually all marquise diamonds to some degree. It appears as a dark, bow-tie shaped shadow across the centre of the stone when viewed face-up. The cause is that the elongated corners of the shape prevent light from entering and exiting those areas efficiently. A severe bow-tie dramatically reduces the stone's brilliance and is visible to the naked eye. A faint bow-tie is acceptable and largely unavoidable in this shape. The bow-tie cannot be evaluated from a GIA certificate alone — it requires viewing imagery or the stone in person. Always request a face-up photograph or video before purchasing a marquise online. See our bow-tie effect glossary.

What colour grade should I target for a marquise diamond?

Marquise diamonds show colour more than round brilliants — the elongated shape and brilliant-cut facets concentrate colour slightly more visibly, particularly at the pointed ends. For white metal (platinum/white gold): G is the practical minimum; F or better is recommended for buyers who want a crisp white appearance. H is acceptable but the warmth becomes perceptible at larger sizes. For yellow gold settings: I–J is acceptable; the warm metal obscures body colour in the diamond. One size up from the round brilliant recommendation is a good rule of thumb for marquise colour selection.

How should I protect the points of a marquise diamond?

The pointed ends of a marquise diamond are the most vulnerable points to chipping. A V-tip prong (also called a claw-tip or V-prong) at each point is essential — this specially designed prong cups the point and protects it from direct impact. Never set a marquise diamond with a standard rounded prong at the tips. The side prongs (typically 4–6 on the long edges) secure the body of the stone. When purchasing a pre-owned or estate marquise, always inspect the tips for chips, nicks, or abrasion under magnification before purchase. See our chip glossary and our second-hand buying guide.