Diamond Depth and Table: The Two Numbers That Determine How Your Diamond Looks

Depth percentage and table percentage appear on every GIA report, yet most buyers ignore them. They shouldn't. These two proportions drive more variation in diamond appearance than any other grading factor.

What depth % and table % actually measure

Both proportions are expressed as a percentage of the stone's girdle diameter (the widest point, measured edge to edge). They appear on every GIA grading report in the "Proportions" section.

  • Depth % = total stone height (table to culet) ÷ girdle diameter × 100. A 1.00 ct round with a 6.40 mm diameter and 3.96 mm depth has a depth of 61.9%.
  • Table % = width of the flat top facet ÷ girdle diameter × 100. A table of 57 mm on a 6.40 mm stone = 57% table.

These two numbers interact: a shallow stone (low depth) with a large table looks big face-up but loses brilliance. A deep stone (high depth) with a small table looks smaller than its carat weight suggests but produces more fire. The ideal is a balance — enough depth for light to reflect correctly, a table small enough to allow crown facets to disperse light into colour. Full proportion data is on every report at GIA Report Check.

Ideal depth and table ranges by shape

For GIA Excellent cut rounds, the ranges that reliably produce top performance:

  • Depth: 59–62.5% (the sweet spot for balancing face-up size and brilliance)
  • Table: 54–58% (below 54% increases fire; above 61% reduces fire)

For fancy shapes (GIA does not issue a cut grade), recommended guidelines from resources like PriceScope's cut guide and the Gem Society:

  • Oval: Depth 58–64%, Table 53–63%
  • Cushion: Depth 58–66%, Table 55–65%
  • Emerald: Depth 58–65%, Table 60–68%
  • Princess: Depth 64–74%, Table 67–74%

Track how different depths affect carat-to-size ratio using CaratAtlas and compare live stones in James Allen's 360° viewer.

How depth and table interact with brilliance and fire

Light behaviour inside a diamond is governed by the pavilion angle (which is closely related to depth %) and the crown angle (which is closely related to table % — smaller table = taller crown = more fire). Cutter manuals describe this as the "magic window" of proportions: stones within the window achieve high levels of both brilliance (white light return) and fire (coloured dispersion).

Outside the window, stones become either "fisheyeing" (too shallow — you see the girdle reflected in the table) or "nailheading" (too deep — a dark circle appears in the centre). Both effects are visible in 360° stone videos. Academic treatment of diamond optics is available at Google Scholar. AGS and GIA have both published proportion studies; GIA's is the basis for the Excellent cut grade system.

Frequently asked questions

Which matters more: depth or table?
Neither alone — they work together. However, if forced to choose one to optimise, depth % has a larger impact on face-up size (lower depth = visually larger stone) while table % has a larger impact on fire (smaller table = more fire). Most buyers optimising value-for-money should prioritise depth in the 59–62.5% range for rounds, then accept whatever table results from that choice. Use GIA Report Check to pull the full proportion data for any stone.
Can I trust the GIA cut grade instead of checking depth and table myself?
For round brilliants, the GIA Excellent grade is a reliable proxy — it already incorporates the full proportion interaction. You do not need to check depth/table separately for an GIA Excellent round. For fancy shapes (oval, cushion, emerald, etc.), GIA does not issue a cut grade, so you must evaluate depth and table yourself alongside the 360° stone video. Resources: PriceScope, Gem Society.
What is a "spread" diamond and is it a good buy?
A "spread" stone is deliberately cut shallow (low depth %) to maximise face-up diameter relative to carat weight. A 0.90 ct spread round might have the same face-up diameter as a 1.00 ct ideal-cut round. The trade-off is reduced brilliance and fire. Spread diamonds are sometimes marketed as value buys by less transparent sellers. You can identify them by checking the depth % — anything below 57% for a round is likely a spread cut. See our depth glossary for full detail.
Does depth percentage affect price?
Yes, indirectly. GIA cut grades (Excellent, Very Good, Good, etc.) incorporate depth and table. A stone with a poor depth that falls outside Excellent range receives a lower cut grade, which reduces its market value. However, within the Excellent range, small depth differences have minimal price impact — the price difference between a 60.0% and 61.5% depth Excellent round is negligible. What matters more is that the stone falls within the Excellent window. Benchmark prices at CaratAtlas.