Diamond Inclusions

Knot

A crystal inclusion that reaches the polished surface of the diamond, forming a raised bump on a facet. Knots are surface-breaking inclusions with potential durability implications depending on their location and size.

What makes a knot different from a crystal inclusion

Most diamond crystal inclusions are fully enclosed within the stone — they sit inside the crown or pavilion, surrounded on all sides by diamond material. A knot begins the same way: as a foreign crystal or structural anomaly trapped within the rough. The difference is what happens during cutting. When the lapidary polishes through the included crystal — rather than around it — the crystal is exposed at the surface, creating a raised protrusion. The "knot" name comes from the analogy to a knot in wood: an anomalous growth that interrupts the smooth surface plane.

On a GIA grading report, knots are plotted with a specific symbol (a circle with a cross, similar to the crystal symbol but annotated). The clarity plot will show location and approximate size. On the clarity grade scale, knots pull the grade down from what the equivalent fully enclosed crystal might receive, because a surface-reaching feature has additional implications for polish quality and potential durability. See our inclusion overview for how all inclusion types compare, and our crystal inclusion entry for the fully enclosed equivalent.

Location and its implications

Where a knot sits on the diamond determines how much it matters in practice:

For durability evaluation, the key question is whether the knot sits near a structurally vulnerable point: a prong contact zone, the tip of a fancy shape, or an area subject to impact. Stones with knots in safe locations and away from stress points present no meaningful durability concern for normal wear. See our ring care guide for advice on protecting vulnerable inclusion positions.

Knot vs other surface-breaking inclusions

Knots are one of several inclusion types that can reach the surface. Related terms:

Review the full blemish glossary for surface features and the clarity guide for how GIA grades the combined impact of inclusions and blemishes.

Frequently Asked Questions

What is a knot inclusion in a diamond?

A knot is a crystal inclusion that has been exposed at the polished surface of the diamond during cutting. The included crystal — typically a different mineral or a disrupted section of the host diamond crystal — protrudes slightly above the surrounding facet surface, creating a raised bump or "knot" visible under 10× magnification. Unlike an internal crystal inclusion (which stays fully enclosed), a knot breaks the surface plane.

How does a knot affect a diamond's clarity grade?

Knots are typically associated with SI1–SI2 clarity grades and occasionally VS2 grades, depending on size and location. Because a knot reaches the polished surface, it is classified as both an inclusion (internal origin) and a surface feature. GIA reports knots on grading certificates using the label "Knot." A knot on the table facet — the largest, most prominent facet — carries more weight on the clarity grade than one on a small pavilion facet near the girdle.

Does a knot affect durability?

Potentially, yes. Because the included crystal and the host diamond may have different hardness or different thermal expansion properties, the boundary between them can be a weak point. For everyday wear, a knot does not present a significant durability problem in most settings. However, a knot on a stress-prone area — such as near a prong seat, near the girdle on a marquise point, or on the table of a stone that will be bezel-set — warrants closer inspection. Avoid stones with large knots in structurally vulnerable positions.

Can a knot be removed by repolishing?

A knot cannot be removed without removing the crystal itself, which would require re-cutting or repolishing the facet to a new depth below the crystal. Doing so reduces carat weight and changes the stone's proportions — it is generally not economically viable. The knot is considered a permanent characteristic of the stone.

Should I avoid diamonds with knot inclusions?

Not necessarily. A small knot on a minor facet in a VS2 or SI1 stone that is otherwise well-cut and eye-clean may offer good value — the clarity concession is visible only under magnification. The key factors are location (away from the table and vulnerable structural points), size (small), and whether the stone is eye-clean at arm's length. Review the GIA grading report's clarity plot and inspect under magnification before buying. See our inclusion glossary and clarity guide for full evaluation context.