Diamond Blemishes

Bruise

A surface blemish caused by impact damage to a polished diamond facet, appearing as a small crushed or granular area, often with tiny radiating micro-fractures. Bruises affect the clarity grade and can be repolished away, unlike most internal inclusions.

The mechanics of a diamond bruise

Diamond is the hardest natural substance, but hardness is not the same as toughness. Hardness means resistance to scratching; toughness means resistance to breaking or fracturing under impact. Diamond has good but not exceptional toughness — a sharp, concentrated impact can cause localised crushing at the surface. When a facet is struck at a sharp angle or with concentrated force, the shock propagates into the crystal lattice, creating a zone of micro-fractures just beneath and at the surface. The result looks granular, cloudy, or roughened under magnification — the "bruise."

The radiating micro-fractures (sometimes called "root fractures") are characteristic of bruises. They differentiate a bruise from a scratch (which is a linear groove made by a harder material drawn across the surface) and from a cavity (which is a pit from inclusion removal). A large bruise can sometimes be mistaken for a feather that reaches the surface, but the cause and character differ — a feather is a planar fracture; a bruise is a three-dimensional shock zone.

When bruises matter and when they don't

The practical impact of a bruise depends on:

When evaluating estate or pre-owned stones, check the table and upper crown facets carefully for any hazy or granular patches — these are the most likely bruise locations. See our second-hand diamond buying guide for a full inspection checklist, and our ring care guide for preventing future bruising through proper storage and handling.

Related surface and clarity terms

Frequently Asked Questions

What is a bruise on a diamond?

A bruise is surface damage caused by impact — when the polished facet surface is struck sharply, small shock waves crush the diamond's crystal structure at the impact point, creating a granular, cloudy, or roughened area. Unlike a chip (which removes material at an edge) or a scratch (a linear mark), a bruise is a zone of micro-fracturing within a facet surface. Under magnification, bruises often show tiny root-like fractures radiating from the impact centre.

Can a bruise on a diamond be repaired?

Yes, in theory — a jeweller or lapidary can repolish the affected facet to remove the damaged surface. However, repolishing removes a small amount of material, slightly reducing carat weight and potentially altering the stone's proportions. Whether repolishing is economically worthwhile depends on the stone's size and value, the bruise's severity, and the cost of the work. For high-value stones, repolishing a bruised facet is standard practice; for smaller, lower-value stones, it may not be cost-effective.

How does a bruise affect a diamond's clarity grade?

GIA classifies bruises as blemishes. Their impact on the clarity grade depends on size, severity, and location. A tiny bruise on a minor pavilion facet may not lower the overall grade at all if other features determine the grade. A noticeable bruise on the table or upper crown will penalise the grade, potentially pulling a VS1 into VS2 or a VS2 into SI1. The GIA report will list "bruise" in the key to symbols and plot its location on the clarity diagram.

How do bruises differ from chips?

A chip is a notch or void at a facet junction, edge, or girdle — it involves material loss at a boundary. A bruise is surface crushing within a facet, away from edges, with no material removed (just structurally disrupted). Bruises are generally considered less severe than chips of equivalent size because they do not create a sharp edge or structural notch that can catch on things or propagate further. See our blemish glossary for a complete comparison of surface feature types.

Are bruises common in diamonds used in engagement rings?

Bruises are uncommon in newly set, properly worn rings. Most bruises occur during rough handling — being dropped on a hard surface, struck against a hard object while removed from the finger, or damaged during jewellery repair. They can also occur during the cutting process. Pre-owned or estate diamonds are more likely to have bruises from years of wear. When buying a second-hand diamond, always inspect under magnification for surface damage including bruises. See our second-hand diamond guide.